220 Millard Ave. SW
Cokato, MN 55321 Mailing/Shipping:
260 Jenks Ave. SW
Cokato, MN 55321
- 320.286.2578 - Phone
- 320.286.2467 - Fax
Please view our product options below. Click the option for a larger image.
Patented High Output 2-Pole Digital (Servo) Electromagnetic Drive System allows higher efficiency and a significant increase in weldable area over industry standard 3-Pole systems. Can drive larger/heavier tools with a lower power demand.
Up to 84 sq in (543 sq cm) Weldable Surface Area (Polypropylene) the most powerful welder in its class.
0-350 lb (0-158kg) Upper Tool Weight capability makes this welder able to drive the heaviest production tools.
Patented Position-Based Amplitude Control Network allows ramp up to full amplitude in as little as 0.04 seconds. Amplitude adjustment from 0.040 - 0.070in (1.02 - 1.78mm) peak-to-peak in increments of 0.001in. Over-Travel Protection that guards the machine from potentially damaging operation. X-Axis and Y-Axis (vibration direction and perpendicular to vibration direction) repeatability of < +/-0.001in.
Continuous Tuning by Closed-Loop Digital Control eliminates the need for a separate auto-tuning step during setup and assures that the machine operates at peak performance throughout the weld cycle.
Allen Bradley MicroLogix PLC with PanelView Plus 7 - 600 Color 5.7in Touch-Screen Graphical Display simplifies parameter input and allows the following to be displayed:
10 Weld Program/Setup Memory allows storage for instant recall, minimizing tool change time.
Process Verification Windows (pass/fail) compare and alarm the user when actual parameters are outside customer programmed minimums & maximums.
Multi-Level Passcode Protection limits parameter adjustment to qualified personnel only.
Enhanced De-Coupled Sound Enclosure for maximum noise reduction (<80 dBA). Enclosure is completely de-coupled from the equipment frame to isolate noise from the swing frame.
Zero-Force Opti-Touch Cycle Start Switches minimize operator fatigue.
Two Valve Lower Tooling Actuation Pneumatic Valve Pack allows user to program additional pneumatic motion on lower tooling such as part clamping or part eject.