• You are here:
Back

HD-OSW

Heavy Duty Orientation (Servo Motor) Spin Welder

The HD-OSW is a heavy duty pneumatic motion controlled orientation (servo motor) spin welder designed for larger diameter, more difficult spin welding applications requiring delivery of high rotational power while maintaining the highest degree of precision.

This servo drive spin welder is capable of orienting part halves relative to each other with a positioning accuracy of +/- one degree. Exact start (home) and stop (final orientation) points can be programmed and precisely controlled.

When compared to non-orientation models, orientation (servo motor) systems typically:

  • Permit precise orientation/alignment of part halves relative to one another.
  • Allow precise depth welding (collapse distance or absolute distance) when orientation is not required.
  • Enable welding of larger parts with more difficult to weld materials.
  • Are much easier to automate as the driver rotational position may be precisely programmed between welding cycles, allowing easier loading of the upper part half into the driver.

Optional Features.

Please view our product options below. Click the option for a larger image.

Standard Features

Ultra-Rigid Rectangular Column minimizes deflection of the system under even the highest pressures.

Modular Design allows adaptability to a variety of production configurations. Controller height may be repositioned or removed from the press and relocated to a user preferred position.

Servo-Electric Drive/Amp 0 - 5,000 RPM Motor ensures precise rotational positioning.

5.7in VGA Color Touch-Screen User Interface with Integral Programmable Operator Control Station simplifies parameter input and allows the following to be displayed:

  • RPM / Weld Mode / Weld Distances (Collapse & Absolute) / Hold Time / Pressures
  • Resettable Parts Counter
  • Total Machine Cycle Counter
  • Diagnostic Display
  • Micro-SD Memory Card Slot (Slot to support use of up to 32G Flash Memory Card)
  • Ethernet Connectivity

Precision Linear Stroke Encoder allows welding by Collapse and Absolute Distance and/or alarm monitoring of these values.

Weld by Revolutions (Orientation) or Time, Collapse Distance, or Absolute Distance (Non-Orientation) allows the user enhanced control for applications requiring precise welding.

Time, Collapse Distance, and Absolute Distance Pass/Fail Windows allow the user to set min/max alarm limits for bad parts for quality control purposes.

Multi-Level Passcode Protection limits parameter adjustment to qualified personnel only.

5 Weld Program/Setup Memory allows storage for instant recall, minimizing tool change time.

Dual Speed Vertical Head Velocity Control with Programmable Valve for Pneumatic Pressure Control allows user to adjust two individual settings for initial head down speed and part contact speed. Programmable control of contact pressure, weld pressure, and cooling pressure in passcode protected memory. Reduces cycle time and improves repeatability.

7.9 Inch (200mm) Actuator Stroke permits loading/unloading with maximum clearance, as well as allowing welding deep within other components.

3.14 Inch (80mm) Diameter Pneumatic Cylinder allows sufficient force for virtually any spin welding application.

Spin Initation (Trigger) by Height with Programmed Delay-Time simplifies set-up. No limit switches to adjust when changing part height. Head-Down step used to teach system target part height. System retains learned height setting in programmed memory.

Zero Force Cycle Activation Switches reduce operator fatigue.

Lockable Mechanical Stop prevents shift/migration of stop setting in even the worst vibrating environments.

Built-In User Inputs/Outputs allow integration of part clamping and/or part presence sensors. Permits external start/stop command functions by customer PLC if used in automation.

Sequence of Operation

  • 1.Operator loads part halves into holding fixture and driver.
  • 2.Operator initiates both cycle activation switches.
  • 3.Actuator moves driver & rotating part half (typically without rotation) into contact with the stationary fixtured part half.
  • 4.Operator is permitted to release cycle activation switches after part to part contact is made.
  • 5.Servo motor spins parts at user-programmed RPM for the number of user-programmed revolutions (or user-programmed: time, collapse distance, or absolute distance) and terminates rotation when desired weld criteria are reached.
  • 6.Welded parts cool under pressure.
  • 7.Actuator retracts to home position and servo slowly rotates to user-programmed home position.
  • 8.Operator removes welded part from fixture.