Back

VAFIR-1015

Vertical Air/Pneumatic Infrared Filter Welder

The VAFIR-1015 is a vertical infrared platen orientation, pneumatic motion controlled infrared welding system specifically designed for welding filter assemblies up to 10” D  x 15” H x 69” L (254mm x 381mm x 1753mm).  Customized variants of this model are available.

The system design is ideal for:

  • Welding stackable filter cartridge modules together.
  • Embedding filter media into plastic end caps (replacing potting operations).
  • Welding of filtration housings.
  • Welding termination fittings (ie: end-caps, twist-lock unions, O-ring fittings, etc..) to the ends of filter cartridge modules.

Optional Features.

Please view our product options below. Click the option for a larger image.

Standard Features

Ultra-Rigid Construction utilizing a tubular steel framework with leveling feet and linear guide shafts & bearings designed for precise tool alignment through decades of use.

Digital Dual IR Controllers provide (4 + 4) Eight Zone Infrared Intensity Control via PLC/HMI with Emitter Burnout Alarm and Digital Incoming Line Voltage Monitoring with settable Alarm Limits. Alarms prevent operation of equipment in the event of emitter failure of if plant voltage rises/sags outside of user defined limits (affecting actual infrared energy output).

Allen Bradley MicroLogix PLC with PanelView Plus 600 Touch-Screen User Interface simplifies parameter input and allows the following to be displayed:

  • Melt, Weld (Seal), & Open Time Digital Control & Display
  • 5 Digital Infrared Energy Control Steps (10% - 100%)
  • Resettable Parts Counter
  • Non-Resettable Total Machine Cycle Counter
  • Diagnostic Display
  • Machine Alarms (history storage of up to 99 alarms)

Multi-Level Passcode Protection limits parameter adjustment to qualified personnel only.

10 Weld Program/Setup Memory allows storage for instant recall, minimizing tool change time.

External 120VAC Duplex Electrical Outlet allows user to easily connect small auxiliary equipment such as computers, printers, radios, etc.

Dual Venturi 25.0 in/Hg (63.5cm/Hg) Vacuum Pump System designed to secure even the largest parts within the tooling.

Pneumatic Power Sliding Safety Door with Zero Force Cycle Activation Switch provides optimum personnel protection while reducing operator fatigue.

Hinged Access Panels with Safety Interlock Switches allow extensive access while providing maximum personnel protection.

Vent Hood with Exhaust Fan evacuates airborne smoke from the operator location.

Sequence of Operation

  • 1.Operator loads part halves into holding fixtures.
  • 2.Operator initiates cycle activation switch.
  • 3.Safety door closes.
  • 4.Part halves are automatically held with vacuum or mechanical clamps/grippers.
  • 5.Infrared platen advances between part halves.
  • 6.Holding fixtures close to make contact with precise mechanical hard-stops on the infrared platen which maintain spacing between the parts and the infrared platen without actual contact.
  • 7.Infrared platen energizes, heating joint areas of part halves.
  • 8.Infrared platen de-energizes and holding fixtures retract away from infrared platen.
  • 9.Infrared platen retracts.
  • 10.Holding fixtures apply part halves together, welding parts together.
  • 11.One holding fixture releases its clamping mechanism.
  • 12.Holding fixtures open, retaining welded part(s) in one fixture.
  • 13.Safety door opens.
  • 14.Operator unloads welded part(s).