TS-1032

TS-1032

Thermal Staking System - Multi Point

Description

The TS-1032 (Large Thermal Staker) is an air-over-oil powered vertical motion Heat Staking Machine designed for a wide variety of heat staking applications requiring a high degree of precision and consistency. This welder offers a robust, cost-effective solution to quickly assemble parts that require multiple heat stakes. The machine chassis features an ultra-rigid tubular steel frame to minimize deflection that can contribute to an inconsistent Thermal Staking process. A PLC with color touch-screen HMI and a vertical axis Linear Encoder provides enhanced process control and more consistent production quality. The large capacity of this machine offers the opportunity to stake more than one part at a time.
 

Advantages of the TS-1032 Thermal Staker:

  • Multiple application uses including heat staking, inserting, embossing, and de- gating.
  • Compatible with a wide variety of materials including most thermoplastics and some difficult to weld materials.
  • Air Post Cooling feature enhances release of stake head from applications with little to no material build-up.
  • Large capacity for single cavity or multi-cavity tooling.

Additional Information

Standard Features

  • Ultra-Rigid Rectangular Column minimizes deflection of the system under even the highest pressures.
  • Modular Design allows adaptability to a variety of production configurations. Controller height may be repositioned or removed completely from the press and relocated to a user preferred position.
  • 3.5” Color Touch-Screen User Interface enables programming of staking parameters and several quality management features. Allows the following to be displayed:
    • Temperature
    • Melt Time
    • Hold Time
    • Total Vertical Stroke
    • Resettable Parts Counter
    • Total Machine Cycle Counter
    • Diagnostic Display
    • Ethernet Connectivity
  • Precision Linear Stroke Encoder allows the system to monitor & control multiple process steps including contact height, weld travel, & final height. Weld Travel Pass/ Fail Windows allow user to set min/max weld travel alarm limits for quality control purposes.
  • Multi-Level Passcode Protection limits parameter adjustment to qualified personnel only.
  • 5 Weld Program/Setup Memory allows storage for instant recall, minimizing tool change time.
  • 3.14” (80mm) Diameter Press Cylinder delivers 620 lbs of clamping force.
  • 7.9” (200mm) Vertical Actuator Stroke permits loading/unloading with adequate clearance for most parts.
  • Adjustable Stroke Velocity permits control of the vertical speed of the welding head, allowing more precise control for sensitive applications.
  • Ergonomically Located Dual Cycle Activation Switches ensure operator safety from actuator descent.
  • Lockable Mechanical Stop prevents shift/migration of stop setting in even the worst vibrating environments.

 Optional Features

  • Special Energy Star Compliant Operating Voltages Transformer
  • 5.7” Color Screen User Interface
  • Expanded Input/Output Module
  • Welded Tubular Steel Support Frame with Leveling Feet
  • Light Screen Safety Protection
  • Pneumatic Powered Safety Door
  • Leveling Casters
  • LED Four Color Light Tower
  • Fixture Clamp Valve
  • Tooling Sensor(s)
  • Data Acquisition Program & 4G Micro-SD Card
  • Compressed Air Reserve Tank

Optional Accessories


AB PanelView Plus 7 - 1000 Graphic Display Upgrade

AB PanelView Plus 7 - 700 Graphic Display Upgrade

Impact Part Marker

Technifor Part Engraving/Serialization Marker

Heated Die Part Marker w/ T-couple Temp. Controller & Heater Burnout Alarm

Ink Stamp Part Marker

Pneumatically Actuated Electrical Connections

Pivoting Test Fixture

Audible Alarm

Venturi Vacuum Generator

Electronic Regulator

Compressed Air Reserve Tank

Fixture Clamp Valve

Pneumatic Powered Safety Door

Programmable Vacuum Sensing Switch w/ LCD Readout

Additional Lower Tooling Pneumatic Actuation Valves

Quick Change Base Plates

External 120VAC Duplex Electrical Outlet

Precision Digital Distance Measurement System

Pneumatically Operated Pass-Thru Rear Access Safety Door

Pneumatically Actuated 3-Sided Locator Assembly

Collision Guarding Package

Heavy Duty Leveling Casters (Lg.)

External Lighting (Lg.)

Quick Disconnect Tooling Sensors

AB Compact Logix PLC Upgrade

Quick Disconnect Outlets for Tooling Sensors

Fork Lift Tubes

Light Screen Safety Protection (HP)

External Lighting (Sm)

LED Four-Color Light Tower

Bilingual Equipment Manual

Bilingual User Interface Panel

Individual User Passcode Log-In

Pendant Arm Mounted User Interface

Special Operating Voltages Transformer

Additional Temperature Control Zone w/ Heater Burnout Alarm

Part Take-Away Conveyor

Powered Lower Tool Carriage/Drawer

Manual Lower Tool Carriage/Drawer

Steps of Operation

  1. Operator loads part halves into holding fixture
  2. Operator initiates both cycle activation switches
  3. If equipped, front door closes
  4. Operator is permitted to release cycle activation switches after door is closed, or if equipped, light curtains are clear Thermal stake (or hot air cold stake) tooling performs the recipe adjustable (time, temperature, pressure, distance) staking process
  5. Welded parts are blasted with cold air to “snap cool” the parts
  6. Actuator retracts to home position
  7. Front door opens (if equipped)
  8. Operator removes welded part from fixture